Release notes
New requested features and debugging based on user feedback.
Download ideaMaker 4.0.3 for Belt 3D Printer
Slice Settings
1. Added "Place Seam on Belt Edge" option to allow the slicer to put the start point at the center of the edges which touching the conveyor belt in higher priority.
2. Add Shells Direction List option to control the printing directions of the shells to counterclockwise (CCW) or clockwise (CW).
User Interface
1. Added Repetitions option and all models on the platform will be printed the number of times.
The custom gcode commands between the repetitions can be changed under Advanced Settings > GCode > Repetition GCode.
Bug Fixes
1. Fixed the issue that the modifiers will be lost when reloading the parent model.
2. Fixed the issue that the model file is not opened by double-click in Finder. (macOS only)
3. Fixed the issue that the recover gcode is not generated properly.
4. Fixed the issue that the models may be lost the connection with the attached group sometimes.
5. Fixed the issue that the values are not sorted properly in the temperature list after the values in the list are modified.
6. Fixed the issue that the parameters are not updated in the Free Cut panel after the undo operation.
7. Fixed the issue that some layers may be missing during slicing.
8. Fixed the issue that some gcode commands are parsed correctly and cause bad gcode preview results.
9. Fixed the maximum changeable speed of the wipe tower and wipe wall speed.
10. Fixed the incorrect extruder color when displaying the gcode files in the duplicate/mirror mode.
11. Fixed the issue that the adaptive layer height function does not work properly with some models.
12. Fixed the issue that the jerk values are incorrect when replacing exact settings values with the placeholders.
13. Fixed the issue that the gap filling exists even the top and down solid fill layers are zero.
14. Fixed the issue that the extrusion speed values are incorrectly output in the gcode files.
Download ideaMaker 4.0.3 for Belt 3D Printer